[peanut]

I have a 71' Nova that I bought new body bushings for. I wanted to install the new bushings and saw that there are 3 different sizes. I know that the smaller diameter ones are for the rad support, but its the other ones that I am having trouble with. The remaining 4 are the same diameter but 2 are shorter by 1/4". The "instructions" that came with them say to use bag 3 in location 3. Problem is that there was no bag. Can anyone tell me which ones go where? Thank you in advance.

 

[Rudy]

If they are the stock rubber bushings, the shorter ones go to the rear holes at end of subframe and the taller ones go to the mid-subframe holes, along with 1/2" thick spacer washer from factory.

 

[peanut]

Thanks for the help!!!