Chevy Nova Forum banner

Wheel studs too long?

2K views 7 replies 6 participants last post by  itslow 
...My question is, can I cut them down to a shorter length? If so, any tips on the best way to do this?
Yes. A sawzall, hacksaw, or cutoff wheel will work. Thread a nut on to the stud before cutting, then back it off after the stud is cut. Clean up the cut end with a file and chase the threads.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top