Chevy Nova Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
178 Posts
Discussion Starter #1
Can someone Post a picture of a factory V8 Power Steering Hose Routing.
I cant seem to be able to find one or Figure it out.
I need to see how it Attaches and Routes (Over Engine mount) or (Under Mount) to the bracket that sits on the Frame
 

·
Registered
Joined
·
178 Posts
Discussion Starter #4
Hose Routing 62-67

So No One as a v8 with the Factory Power Steering
I just need a couple of Pictures of how it routes from the Power Steering Box over to the Frame Bracket then down to the Slave Cylinder
 

·
Premium Member
Joined
·
1,749 Posts
Ps

I tried to get some pictures, with the car on the ground.. turned out terrible. One of the hoses on mine runs over the top of the motor mount and the other runs above the tie rod .. I did not use the stock hose mount bracket to frame, seemed very restrictive..
 

·
Registered
Joined
·
178 Posts
Discussion Starter #8
Sorry i was not able to reply to this sooner. Thanks for posting the picture.
I will try and route and angle my hoses like the ones in the picture to see if it works.
 
1 - 8 of 8 Posts
Top