[socal_nova]

I have a gen 1 Nova that I am putting a truck LS engine in. I have a CBR entropy radiator and am running the truck water pump and drive accessories. I am looking for upper and lower radiator hose part numbers that will work for this application. I have searched and found f-body hose part numbers but the truck water pump outputs are different.

 

[Sreavis007]

Calipers to measure the outlet and inlets sizes... mine had 2 different sizes because I used an SBC radiator that I had laying around. I used a reducer and splice to put 2 different hoses together and tapped the reducer for my steam vent port outlet.

You will need to make a few parts store trips to find a hose that works.... I believe some 1st gen guys have had success with Ford Windstar upper hoses

 

[snook715]

Directly from Entropy website "For the upper hose, the upper hose from a 1995 Mitsubishi Eclipse turbo all wheel drive is almost a perfect fit (depending on your motor mounts)"

 

[bkhotrod]

I believe the entropy are based around car accessories not the truck

 

[bkhotrod]

My 6.0 swap I made my own hoses with steel pipe and hose ends