[gdaddy]

I have a 66 to put on the rotisserie. It has been modified for a TCI rear suspension so the spring hangers are gone. Has anyone made any mounting plates with this situation? If so do you have pics? Will the bumper bolt holes be strong enough to hold it? I’ve included a couple of pics of the rear.

 

[Pragmatist]

I did this.....

 

[Philip]

The rear spring bushing in the frame rail is a good spot to attach.

 

[Birdlab]

I had a rotisserie that mounted using the rear bumper mounting bolts. Worked well that way.

 

[gdaddy]

The rear spring bushing in the frame rail is a good spot to attach. View attachment 449058

My spring bushings have been removed so I have a large hole. If the bushing was still there that would be my go to spot.

 

[gdaddy]

I had a rotisserie that mounted using the rear bumper mounting bolts. Worked well that way.

I was looking at that spot, just wasn’t sure how strong the sheet metal was in that spot

 

[67 canso sd]

No pics on my phone, but i also used spring bushings, that way i could still get tail light panel. Couple big washers, thru bolt and nut would work for bushing area.

 

[doerf]

shackles out of flat bar bolted into actual bushing is rear spring mount
shackles welded to rotisserie brackets

I like the play in angle of car relative to rotisserie the bushings give, very solid in every other axis