Chevy Nova Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter #1 (Edited)
How hard can this be..got a 71 ss clone with muncie and original 10 bolt rear..need to replace rear yoke (so ive been told and u joint..)..cause they are a bit loose and make a clicking sound..
Is this a do it yourselfer (low-moderate knowledge/tools)..
Are these yokes hard to find or something?
Been getting the run around from the local mechanic about the parts..huh?:confused:
Like to just do it myself..any suggestions??
 

·
Registered
Joined
·
2,888 Posts
How hard can this be..got a 71 ss clone with muncie and original 10 bolt rear..need to replace yoke (so ive been told and u joint..)..cause they are a bit loose and make a clicking sound..
Is this a do it yourselfer (low-moderate knowledge/tools)..
Are these yokes hard to find or something?
Been getting the run around from the local mechanic about the parts..huh?:confused:
Like to just do it myself..any suggestions??
Changing the yoke my be hard but can be done. I wouldn't do it I'd leave it up to someone that knows rearends. Before going through all that I would measure the yoke and make sure the right u joint is in there.
 
1 - 2 of 2 Posts
Top