[cjohnson6772]

Can someone post pics of how they routed power steering lines with the CBR rack and Fbody accessories? I have searched and found a few threads but most use different accessory drive or don't include pics. Thank you.

 

[bigjman50]

Out of my camera roll these are the only two pics i have. What else do you need?



https://flic.kr/p/28NThbV

https://flic.kr/p/296vr1j

 

[cjohnson6772]

Thanks. These pictures are perfect! Just a couple of questions:

Is that a 45 deg on the top side of the high pressure line?
Do you happen to remember the hose length?
The only other picture that may be helpful is a picture of how the lines are routed/secured around the alternator.

As a side note: your car is what convinced me to go with 17" rallys and 2" lowering springs in the rear!

 

[bigjman50]

Thanks!
I found this one thats closer up. The hose with the AN fitting is the high pressure side. I can try to get you some more pics sometime this weekend. This is my work weekend so im busy.


https://flic.kr/p/296vr1u