Chevy Nova Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
404 Posts
Discussion Starter #1
We are replacing the driver side kick panel and realize we may have to get the parking brake assembly out of the way to get at one screw.

The two bolts holding the assembly to the firewall......where are the nuts securing those bolts in the firewall? What's the easiest way to access them?

We can get at all the screws holding the panel in place except the top one.

Thanks for any help...............
 

·
Registered
Joined
·
435 Posts
You can get them off it's just a pain in the butt. the best thing i found to use is a Deep Socket and a Air Ratchet. if i remember right it's a 1/2 Socket.
it's a small space to work in but it beats taking the hole fender off. it would be easier if you took your hood off but i dont think you have to.

Hope this helps Robert.
 

·
Super Moderator
Joined
·
12,017 Posts
drop the inner fender down and the nuts are easily accessable. The inner fender is real easy to work with and no panel alignment needed when going back on.
 
1 - 5 of 5 Posts
Top