Chevy Nova Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
681 Posts
Discussion Starter · #1 ·
whats the deal on this plastic sleeve between the shaft and pump? the sleeve on my pump i took off seems nice and tight on the shaft of the oil pump.my new pump the plastic sleeve seems to have a little wiggle side to side,is this going to be a problem,had the pump on and the pan bolted back on but something told me to take it apart again and make sure...thank cranker
 

· Premium Member
Joined
·
7,186 Posts
If you have the front sump pump, the regular shaft won't work. Chevy II's have a shorter shaft. There is no aftermarket shaft.
 

· Premium Member
Joined
·
16,345 Posts
The Melling part Number for steel sleeve guide oil pump shaft. IS-55E

No need to purchase other brands, besides it's most likely made by Melling anyway.

http://store.summitracing.com/partdetail.asp?part=MEL-IS-55E&autoview=sku

Al
If you have the front sump pump, the regular shaft won't work. Chevy II's have a shorter shaft. There is no aftermarket shaft.
Very true!!!!!!
If you have a front sump pan, the part I listed will NOT work!
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top