[ricmac_72]

Hooked up a Hurst line lock but I’m guessing it’s connected wrong. The front brakes will not hold when I activate the solenoid and the red light doesn’t stay on either (it lights up but then goes right out). Help please! Can I see some pics of you guys (finished & working line locks) I dunno if I hooked something up wrong.

 

[bracketchev70]

If the linelock is wired correctly the light will stay on if the solenoid is energized.

 

[jeff66]

You do need to press and hold the button (if you are not).
Mine you clamp brakes firmly press and hold button. Release brakes fronts will remain clamped light on . Release button to go.

 

[ricmac_72]

You do need to press and hold the button (if you are not).
Mine you clamp brakes firmly press and hold button. Release brakes fronts will remain clamped light on . Release button to go.

Do you have any pics of your line lock?

 

[ricmac_72]

If the linelock is wired correctly the light will stay on if the solenoid is energized.

The light comes on but then goes right back out. Do you have Pics of your installed line lock?