Chevy Nova Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,879 Posts
You will have to cut out and rebuild the trans tunnel, fab up a crossmember for the 6 speed and make a hyd clutch setup work, but the motor should bolt up to the stock V8 frame mounts.
 

·
Registered
Joined
·
3,879 Posts
I believe from the point where the trans meets the bellhousing to the trans yoke will need to be cut out and made bigger. The t56 is a much larger trans than a muncie.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top