Chevy Nova Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
I was told to start with 67 orignal alignment specs, but what have you all come up with? The assembly book I have says 1* @ 30' for camber and caster and 1/4 to 3/8" toe in. Will this make sense for the alignment? This is the only spec I have. Thanks in advance.
 

·
Premium Member
Joined
·
3,361 Posts
I was told to start with 67 orignal alignment specs, but what have you all come up with? The assembly book I have says 1* @ 30' for camber and caster and 1/4 to 3/8" toe in. Will this make sense for the alignment? This is the only spec I have. Thanks in advance.
Here are good alignment specs:

Camber: 0 degrees L and R
Caster: 1.5 deg L, 1.75 deg R
Toe in: .1-.2 deg (1/16"- 1/8")
 
1 - 2 of 2 Posts
Top