Chevy Nova Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
312 Posts
Discussion Starter #1
Help guys.. I need some help with mixing clear coat. I remember its 1 to 1 with the base coat and base maker but I cant remember the ratio for clear and actavator.. I thought it was 4 parts clear and 1 part actavator...

Mitch
 

·
Premium Member
Joined
·
8,478 Posts
What's the brand? Isn't the mix ratio on the label?

Randy (not all clears are the same!);)
 

·
Registered
Joined
·
388 Posts
I started here...
http://pc.dupont.com/bowstreet5/web...c/common/Controller/InnerAction!visitorAction

then clicked on the "Products" button near the top right hand side of the page. Next I clicked "Technical Information" at the left. When I clicked on "ChromaSystem" on the left of the page displays all the info on it. Near the bottom is the clear info, pick your product and it shows the mixing instructions...

If this doesn't help, check your area for a Dupont jobber and get the mixing info from them...
 

·
Registered
Joined
·
259 Posts
For most of the newer dupont clears it's 3 parts clear, 1 part activator and 1 part reducer. You can fudge a little each way and it will be fine.

Ryan
 

·
Registered
Joined
·
54 Posts
The pics arent working!! NOOOO!!! lol.
 
1 - 11 of 11 Posts
Top