Chevy Nova Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
Ok ... I was replacing the canceling cam on my turn signal switch, while doing so some of the small springs/contacts behind the cam came out. :eek:

Anyone have a pic of how this all reassembles? I have tried a few combinations and got everything but one rear brake light to work. It has a new bulb and new socket, and the ground is bolted to the body. I can get both elements to light manually by jumping it, so my ground is good.

Testing the brake light at the plug coming out of the steering column, I get 12volts on one side (purple) but not other (pink) when pushing the brake. So I’m pretty sure it was due to my replacement of the cam… any thoughts?

Oh yea 1963 Chevy II Wagon

-brady
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top