Chevy Nova Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
118 Posts
Discussion Starter #1
Here is my current shifter setup.







I would like to add an SS shifter Console and Autometer Gauge cage and replace my three gauge unit and make it look more like an SS.




I was wondering if anyone with a SS console can tell me what the inner measurements are for the console(Where the shifter fits into)

I measured my B+M Hammer shifter plastic housing and its 6 in. wide x 13 in long x 6 in.tall.
 

·
Premium Member
Joined
·
31,194 Posts
It's 7 1/8" x 5 1/8" at the narrow end and 5 3/4" at the wider end. There is a slight taper that is wider where the gauges are and narrows at the back.
 
1 - 4 of 4 Posts
Top