[Fab4]

Will a TH350 tranny or a 4 speed Saginaw mate to a ‘64 stock cross member? Still trying to figure out which tranny application to go with so I thought I’d start with cross member question. Thx

 

[acd65post]

I bought a 62 parts car and it had a turbo350 bolted in to the stock tranny cross member behind a 250

 

[Mike Goble]

You need to do a little trimming on a stock 1st/2nd gen crossmember to get a TH350 to fit because the pan interferes. The manual tranny should bolt right up.

 

[Fab4]

Hey Guys Thanks for replies. Happy to hear both options are doable.

I bought a 62 parts car and it had a turbo350 bolted in to the stock tranny cross member behind a 250

You need to do a little trimming on a stock 1st/2nd gen crossmember to get a TH350 to fit because the pan interferes. The manual tranny should bolt right up.