[Project Nova]

Anybody got these? I just received a complete set of uppers and lowers. Can anyone tell me if the spring pocket in the tubulars are the same depth as the originals? Im putting the original front springs back in and wanted to know if front end heigth would be the same.

 

[Chevy6455]

I have been looking into the CPP front end kit myself and I believe it is designed to sit at the same height with stock springs. They also offer 1 1/2" drop springs as well.

 

[36couper]

Yes, the spring pockets are the same. Just ensure the tab of the spring lines up with the notch in the upper part of the pocket.
I just recently installed the CPP upper and lowers. The difference in handling is totally different than stock. :yes:

 

[TomM]

You reuse the stock spring perch, might be about 1/2" difference from stock...not an issue. As previously stated, make sure your upper perch is clocked correctly. I put some silicone between the spring and upper perch to hold it in place while I stabbed it back in the tower....

T,