Joined
·
396 Posts
Anyone have any tips for getting oil and crud off raw aluminum manifolds?
I am thinking about Gunk and an old toothbrush.
What about easy off?
I am thinking about Gunk and an old toothbrush.
What about easy off?
cleaning aluminum intake mainfolds
1 - 4 of 4 Posts
Joined
·
2,638 Posts
If you're not near painted surfaces, lacquer thinner or parts cleaner or mineral spirits all are superb. I've used simple green, but it needs to stay away from paint too, though it's not nearly as aggressive as the other chemicals.
Joined
·
2,246 Posts
cleaning intake..
Brakekleen works good with a small brush....a little carb cleaner can do the job also. Just limit the "spraying" so you don't other adjacent painted finishes....even wax and grease remover will work with a little elbow grease...and that stuff is mild.
wilma
Brakekleen works good with a small brush....a little carb cleaner can do the job also. Just limit the "spraying" so you don't other adjacent painted finishes....even wax and grease remover will work with a little elbow grease...and that stuff is mild.
wilma
Joined
·
297 Posts
yes Brake Clean ( acetone) will do it nicely without messin up any painted surfaces.
1 - 4 of 4 Posts
