Chevy Nova Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
288 Posts
I hope some of you guys realized that the outer piece of wood isn't the contact point the wheel will have, which is against the drum face, not the end(or "hub") of the axle... it does look like he added second piece of wood to the backside that is as thick as the "hub" of the axle, so his tool remains flat... & the overall backside avalible measurement is taken from that point...
Cars4kids: the tool can still be used to help find what 18" wheels/tires you can run... you will need to find the overall dia (26" in this case, 13" x 2) and the overall width of the tire and then check tire sizes until you find some in that range... Have you looked in the "tire sizes that fit" thread stickied somewhere on Steve's? I'd look in there to see what has been posted that others have tried or made fit...
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top