[62my400]

AFXSD43C Has been in for 3 years. Today the bearing decided it was tired and decided to not roll anymore.

What size bearings are these? is there a part number cross reference list somewhere?

This was a thought when i bought this and another conversion kit is they don’t seem to include a list of part numbers they use for wear items.

Anyone know the bearing number?
or the spindle number?
or the rotor with the studs?

 

[Shane65]

The bearing should have a number on it. Maybe not 100% of the time but normally there's a number.

 

[62my400]

The bearing should have a number on it. Maybe not 100% of the time but normally there's a number.

I’ll try to look at the not exploded view one 🤣. I don’t see why they don’t come with a list of wear parts part numbers.

 

[SCHWABIE]

I'd say it's most likely an A-3 and A-6 wheel bearings , you can match them up at your local parts supplier

 

[Nova Thug]

Typically, these types of wheel bearings don’t fail in such a short time frame.. A lack of wheel bearing grease, contamination in the bearings, or something mechanical like improper bearing preload could cause a premature failure.. You might want to do some investigation to determine what could cause this..

 

[62my400]

Typically, these types of wheel bearings don’t fail in such a short time frame.. A lack of wheel bearing grease, contamination in the bearings, or something mechanical like improper bearing preload could cause a premature failure.. You might want to do some investigation to determine what could cause this..

I’m pretty sure it was over pressed when installed.

 

[Gillis]

Call Right Stuff. They made their kits using GM stuff you can order over the counter at any parts store.
At least they used to. I bought my kit 9 years ago and it uses all over the counter stuff, you just need the GM part number and you’re good to go.

 

[TR67ChevyII]

Those kits just use standard factory style parts. So you can just ask for bearings, spindle and rotor for any 67-72 nova.

 

[bptactical]

Chinesium bearings strike again!

 

[neils63ss]

I believe it's a 2wd s10 front rotor...No #s on the old bearings? Should be.

 

[Longroofguy]

I contacted AnnMarie Blakemore <[email protected]> for help on parts for the kit that I installed 9 years ago. She was quick to help. This was just the front kit which is the same as the front kit provided with your setup.
AFXDC03C front kit for a1962-67 Nova/Chevy II
BR02C2 - rotors 69 Chevelle
BC14N and BC15N calipers and pads 69-72 Chevelle
FHK03 - flex hoses off the calipers
WBK01C - wheel bearing kit w/grease seals and washers and inner/outer bearings
Timken LM11949 (Outer Bearing)
Timken LM67048 (inner bearing)