[bomber495]

I am installing a Alpine Flip Screen TV/Radio and it requires you too hook a wire into the parking brake wire and the foot brake wire. I believe the foot brake wire is orange but im not sure which color wire is the parking brake wire. Please help me out and I need to know which are the hot wires for both I believe. Thanks a lot!

 

[Custom Jim]

Without looking at a diagram and going off of memory, I'm thinking the orange on the brake switch is the constant 12 volts. The other wire on this connector should show 12 volts when the brake pedal is pushed down.
The emergency brake wire should be easy enough to access right at the switch on the emergency brake pedal assembly.

Ideally don't use the scotch clip connectors that come with the radio's but instead strip the factory wires insulation back, wrap the added wire around the factory wire, solder the connection and then insulate the connection.

Jim