[dave's 62]

On a 68 non-power m/c which outlet is for the rear and which is for the front brakes?
I belive the rear outlet(closest to firewall) is for the front and other is for the rear. On this m/c the small resivore is towards the firewall.
Thanx for the help.Dave.

 

[dave's 62]

Bump!!!:bored:HEEEELLLPPPP

 

[The Big Al]

On a 68 non-power m/c which outlet is for the rear and which is for the front brakes?
I belive the rear outlet(closest to firewall) is for the front and other is for the rear. On this m/c the small resivore is towards the firewall.
Thanx for the help.Dave.

The large reservoir is for the disc brakes on front.

Al

 

[dave's 62]

Thanks to the big guy.:thumbsup:

 

[taz3]

The large reservoir is for the disc brakes on front.

Al

They're the same size on the 68's, I have one and I don't see any difference.

 

[dave's 62]

Well I ordered a 68 m/c for the disk brake swap on my 62,was told that m/c would work? and the front res. is biger then the rear res. I had gotten a drum- drum m/c and the resiviors are the same size. maybe something wrong hear?

 

[taz3]

Do you have any pics of yours, typically the bigger reservoir is for the front with disc set up. I bought a replacement 68 master for manual disc, and it's larger then the standard drum MC but the front and rears are the same size. My 69's a different then the 68.

If anyone has pics of an OE 68 disc brake MC please post them.:yes:

 

[dave's 62]

no pics at this time but i can get some in a little bit.

 

[taz3]

My camera's not here right now, I'll post pics of what I have later too.

 

[dave's 62]

Heres a pic of what i got.

 

[taz3]

Mine is similar to that, only it's rounded at both ends, like yours is at the front and the patrician is in the center. I would think mine is wrong, yours looks to be correct IMO.

 

[dave's 62]

Should i install a adjustible prop valve for the rears?Or is the master caliberated correctly?

 

[taz3]

From what I know they need a prop valve, and 68, & 69 are the same prop valve according to the parts book.

 

[dave's 62]

I was thinking of getting a adjustable prop valve. know of any good priced ones?

 

[taz3]

I've never used any aftermarket ones.