65 rusty small tire Nova build
121 - 140 of 150 Posts
Joined
·
123 Posts
[QUOT That's as high as you can go and still put a headliner in it. E="Nova SS, post: 5909237, member: 13"]
hoops kind of high, are you going to run a headliner?
[/QUOTE]
hoops kind of high, are you going to run a headliner?
[/QUOTE]
Joined
·
123 Posts
I built these front leaf spring buckets for the Smith Racecraft split mono leaf's. They will have four different levels of adjustability when done.
Joined
·
123 Posts
Here are the points of adjustment I'm going do drill out.
Joined
·
123 Posts
This will be welded to a flat plate and dropped down through the floor under the back seat.
Joined
·
123 Posts
These plates will be welded to the floor holding the front leaf spring buckets in there new location inn-board of the factory frame rails. The plates will be tied in with the new tube chassis interior frame we will be building.
Joined
·
123 Posts
Here is the front spring buckets that will drop down through the floor.
Joined
·
123 Posts
Joined
·
123 Posts
Looking from the back of the car towards the front, Front leaf spring buckets (that piece you see blocking the bottom is tacked on to keep from warpage during building of the buckets).
Joined
·
123 Posts
Got the frame connector bent up and ready to weld in.
Joined
·
123 Posts
So far everything is coming out as planed and fitting up perfect.
Joined
·
123 Posts
Joined
·
123 Posts
Whipped up this bar today to tie the front leaf spring buckets together.
Joined
·
123 Posts
I got both frame connectors installed today. They run from the main hoop crossmember all the way up to where the front stub bolts on.
Joined
·
123 Posts
Joined
·
123 Posts
Joined
·
123 Posts
This is the start of the trunk frame work. The rear sliders will be fastened to these plates that will be welded to the floor.
Joined
·
123 Posts
I’ll tie this rear structure into the front structure.
Joined
·
123 Posts
121 - 140 of 150 Posts
Join the discussion
Join now to ask and comment!