Joined
·
21 Posts
Does anyone happen to know what size screws are used in the 63 console? I know they should be a round head counter sunk, but not sure of the length and size.
Thanks
Thanks
63 console screws
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
upper V8 radiator hose ???
1st & 2nd Generation Chevy II/Nova'sAnybody have any ideas on what radiator hose to run.Running sbc,with a aluminium downflow rad hose outlet on left side,therm housing straight and pointed up ward.I ordered a stock hose for a 65 V8 car everything looks good, until it gets to the therm housing where points up instead towards the...- 1
- 21
-
two to many · updated
-
Five speed in a 1966 SS with console
1st & 2nd Generation Chevy II/Nova'sIs there a five speed that will fit with no tunnel mods?- 2
- 93
-
Rogue Green Wire
1st & 2nd Generation Chevy II/Nova'sGuys, I have a 67 SS that has been setting for about 6 months and I look under the hood and find a rogue green wire that is hanging lose from the stock wiring on the firewall. Checking to see if someone has original wiring that would know where this wire would go... I have checked and can't...- 3
- 97
-
Fred's66 · updated
-
Hedman Chassis Header Fitment on a 67
1st & 2nd Generation Chevy II/Nova'sI decided to get away from my fenderwell headers and move to chassis headers. I chose the Hedman 68168 Ellite headers based on the "most bang for your buck" (coated headers at a decent price). I also thought I did a good job of checking reviews on fitment but, now that I am running into issues...- 9
- 362
-
67NovaSS · updated
-
Bob's 66 SS Rebuild
1st & 2nd Generation Chevy II/Nova'sI purchased my Lemonwood yellow 66 Chevy 11 Super Sport soon after graduating high school. It was a stock SS with 22,000 miles, black interior and Saginaw 4-speed. It was the prettiest car that I ever saw. It wasn't long before I had mag wheels and dual exhaust on it. I drove it many years...- 52
- 3K
-
menova · updated
Join now to ask and comment!