Chevy Nova Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
484 Posts
Discussion Starter · #1 ·
Anybody using 5/8" studs with the nut on the backside of the axle, aluminum spacer, and the actual lug nut with Weld Draglite wheels and drum brakes? I know the high dollar race wheels all use this type of stud and nut setup just trying to make sure this is possible with my wheels.

I will be ordering axles before long and don't want to mess up having them drilled for 5/8" studs when they may not work with my wheels.
 

·
Registered
Joined
·
484 Posts
Discussion Starter · #3 ·
Are your studs 3"? I have called around trying to find out what will work. Moser says their 3" stud part# 8080 is what I need. I can't verify the specs on Mosers studs. I called Strange and they said to use a 4" stud part# A1041. I checked the specs on this stud and it looks like it will work. Its the only one from Strange I have seen that has a shank long enough to protude outside of the wheel.

If I could get as much tire under my car as you seem to have I would be doing alright. I would like to mini-tub the car but I am going to have enough on my plate getting the car back together in the time frame I have laid out.
 
1 - 2 of 2 Posts
Top