Chevy Nova Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
So I converted my column shifter to Hurst floor shifter. The shifter position of 2nd and 3rd were reversed as the groove for the shift rod was on the bottom of the shaft. I removed the side cover and filed a groove on the top of the shaft. I didn’t pay close enough attention to the position of the shifter forks and lug mechanism when I removed it. I haven’t been able to get in back on in the right position as it doesn’t want to shift, specifically 1st and reverse. Everything was working fine (except the shifter position as mentioned above) until I removed the cover. Any help would be greatly appreciated.
 

Attachments

1 - 1 of 1 Posts
Top