[72_4.8L]

After changing back to my original steering wheel, I seemed to have misplaced the nut and washer. Anyone know the specs on the nut and washer so I can go to Lowes tomorrow? I know it's a 7/8 nut but not sure of the size and pitch of the threads.

thanks

1972 Basically stock looking sleeper.

 

[Twinshadows]

I don't know for sure .............. but, found this at the bottom of this page :

https://www.stevesnovasite.com/forums/showthread.php?t=227089


I did look in my Factory Assembly Manual ....... It showed the 's/w nut' .... but no part number or size.

 

[sbc1320]

I don't know for sure .............. but, found this at the bottom of this page :

https://www.stevesnovasite.com/forums/showthread.php?t=227089


I did look in my Factory Assembly Manual ....... It showed the 's/w nut' .... but no part number or size.

Says 1/2"x20 in the description.

 

[72_4.8L]

I found a post where it said that the 1/2" one was too small. I'm going with the 9/16" - 18. We'll see what happens.

Thanks