[batman09]

I need to confirm the 04-06 gto pan is correct for a stock 67 clip?I also need the correct part number for the pan,pickup tube,windage tray,dip stick and anything or just the pan if thats all you got.thanks bm
ps ls3

 

[batman09]

I guess these are the two gto pans....not sure which one to get and what the difference is?......12581209 & 12599397.....thanks bm

 

[Nova 404]

In September 05 the Assembly Part Number was superceded from 12561541 to 12581209.
The assemblies are completely interchangeable.

12581209 has casting number 12581210 on the base of the oilpan. This is the part used on the 04&05 GTO's.

06 GTO's had a slightly different oilpan with oil sensors in it. Part Number 12599397.

 

[batman09]

In September 05 the Assembly Part Number was superceded from 12561541 to 12581209.
The assemblies are completely interchangeable.

12581209 has casting number 12581210 on the base of the oilpan. This is the part used on the 04&05 GTO's.

06 GTO's had a slightly different oilpan with oil sensors in it. Part Number 12599397.

thanks Brian!!you da man!!

 

[ssx]

I had a GTO pan, but it didn't work. Could be because my car has the CPP front end and a unisteer power R&P...Not sure? We ended up going with the Moroso LS pan.

 

[abigassbowtie]

Hate to bring this back from the dead but i need some info imsick of searching so please forgive me if this has been asked .
Im putting a 5.3 in my 63 with stock steering and was wondering if the gto pan will work later on when i switch to a cbr manual rack OR if the f-body pan will work with both stock steering and cbr manual rack ? Im just trying to avoid having to buy 2 oil pans.

And if the cbr mid length headers will work with both oil pans ?

Thanks in advance for all the help

 

[Nova 404]

Mid length headers will work with both pans,Sorry you will need to swap pans unless you do the rack on the first go around,or stay with stock steering.There is no pan that will work with bolt types of steering

 

[abigassbowtie]

Thanks thats all i needed to know

 

[abigassbowtie]

One more question what all do i need to buy to convert it to the gto pan
Will i need the gto windage tray ?

Pan
Dip stick and tube
Gasket
Windage tray?

Thanks in advance

 

[Nova 404]

You will need the oil pick up tube and a new O ring as well.

 

[abigassbowtie]

Hopefully thats everything i just ordered it from gm everything was 373.69

 

[abigassbowtie]

In the future you do not need a oil pan gasket the new oil pan comes with one and the windage trays are the same for 5.3 and gto

 

[no go nova]

this pan should work with both setups another member has it on his with stock steering. scroll down to see it for 62-67 Nova
http://www.milodon.com/oil-pans/street-oil-pans-lschevy.asp