I have laid down some lines on my floor in preparation for a 4-link and have found that the pinion shaft (8.5" 10 bolt rear) is offset 1" to the passenger side of the car from the center line of the car. I double checked by measuring from each leaf spring to the pinion center and sure enough it...
Most of us will have to do this eventually, so a writeup might help. Nothing earth shaking here, but what the heck.
Here are most of the items involved. My original frames are in pretty good shape, so I reused those, and the glass itself.
The lower tracks are almost always rusted out. There...
Got two sets of bucket seat tracks.
Not sure which is correct for my '67.
They are both the correct 14.25" or 14.50" floor mount spacing.
However, the front mount is different.
One pair has a split front hole and the other pair has a solid hole.
Need to know which one is right before I get rid...