Chevy Nova Forum banner

headers

  1. Headers for a 194

    Drivetrain & Performance
    Hey guys So I’m thinking about hopping up my 1962 194 and I found a dual carb intake but I’m looking hot some headers but I can only find ones that say they will fit 216/235/261 I read a post on here that said they should still work so I just want to make sure that that is true here is a link to...
  2. Help Finding Headers

    3rd Generation Chevy II/Nova's
    I have a small block 350 in a 68 nova and need headers that will fit around the steering box. Been checking with Headman and have had no luck. Any suggestions would be greatly appreciated! I will upload picture.
  3. 1-7/8” headers and 3” exhaust

    1st & 2nd Generation Chevy II/Nova's
    Here is a video of my personal car using our 1-7/8” headers and 3” exhaust -Stainless Made in Ohio using USA mad materials -Small block and LS 1-7/8” available -LS works with stock front end and aftermarket bolt ons...r/p only -SBC is designed for the stock front end STEERING BOX and rack and...
  4. Small block chevy headers

    Church Boys Racing
    Church boys racing is finally going to have SBC headers available !!!! We are currently having long tube small block headers designed to fit the following: -1962-1967 Nova - factory chassis with steering box - factory chassis with CBR rack/pinion - aftermarket bolt on chassis - automatic only...
  5. Summit Stainless Headers

    3rd Generation Chevy II/Nova's
    Hi All, Longtime follower of the site, but have posted very few times. This is such a great resource! I have a 70 Nova with a 350 and 4 speed. I stumbled across these Summit full length headers today. T-304 stainless with 3/8" flange. Not polished, but I figure being 304 they would hold...
  6. How can i fix rusty headers?

    Drivetrain & Performance
    My headers are in great working condition but they are rusty. No holes or anything like that. I talked to a guy about sand blasting them but he wants $100.00 Can i just treat the rust with rust mort and paint them with a high heat paint afterward or will the rust come through all of that? What...
  7. Help finding hooker headers that fit!!

    Drivetrain & Performance
    I have a 1972 nova with 502 bbc an am looking for a part number for headers that will fit my set up, i also have power brakes, and rear steer rack and pinion from steeroids. I know i can't be the only person with this set up amd would appreciate help finding correct headers. I know lemons makes...
  8. BBC headers for my 73

    Drivetrain & Performance
    I need to get a set of headers, probably 2" primary's, for my BB swap into my 73. Do I need to get a set specific for the 3rd gen or are there other years that will fit from the 2nd gen? Any from the Camaro? The car has a 454, M20, power brakes, and power steering in it. I also have used the...
  9. header prblems

    Drag Racing Forum
    hello, I got a 72 ventura and i have 421 stoker. had to buy nova headers to fit cause of the steering box. and now i bought canfield 220s with angle plugs and have all kinds of hell. any suggestions. or do i have to start cutting and welding.
  10. Header fitment?

    3rd Generation Chevy II/Nova's
    Has anyone used hooker headers 2451 http://www.jegs.com/i/Hooker/520/2451/10002/-1?s_kwcid=TC%7C18392%7C+hooker%20+2451%20+headers%7C%7CSM%7Cb%7C19354895231&gclid=CNyp-Yuwo7MCFYp_Qgod0H8Alg#accessories On a 1968 nova 350 with factory ac and manual steering? Summit says they should fit but I've...
  11. header clearance issues

    Drivetrain & Performance
    hey guys ive got a 72 nova i bought as a rolling chassis and im trying to put a 350 in it but im having a hard time getting the headers to come close to clearing the steering linkage. i bought these long tube headers off a guy who had a 71 nova with a small block so i assumed they would...
  12. To Port, or Not to Port...?

    Drivetrain & Performance
    Hey guys, I'm driving a 73, 4 door, with a 250 l6, all stock, with a powerglide trans. I'm looking to do upgrades (aren't we all) but I'm at a bit of a price pinch right now. I've already decided I'm going to put on a clifford ram-air intake and split headers, but until I get the money to...
  13. Best Header Advice Needed

    Drivetrain & Performance
    I have looked at all the threads on the best headers to use, or even fender well headers and i am still confused as what to buy. Will any of the headers made for a 62 to 67 work? I was wondering which headers will work best. My 64 is lowered 2 inches in the front so I think fender well...
  14. headers for a 64

    1st & 2nd Generation Chevy II/Nova's
    i just bought a 64 chevy 2 and droped a 350 in it. i think patriot block huggers came on the motor,they dont fit. most headers i am shopping for say 283 for application, what headers will fit a gm350? (note: stock front end) also will i benefit from running off set motor mounts. any info helps...
  15. SBC to BBC swap Headers hit Power steering box ?

    Drivetrain & Performance
    Car: 1971 nova Engine: 468 bbc alum heads Technical notes: swaped old subframe for new '72 powdercoated subframe, installed the motor on the correct BBC frame to motor mounts. Problem: When i go to install the headers (Doug's shorty's for correct year) they hit the ps box, I jacked the motor...
  16. Which Summit Headers & Magnaflow Mufflers for stock 71?

    Drivetrain & Performance
    Hi All, I have a 71 w/original stock 350, original cast iron intake and TH350 on the floor. Current exhaust is 2.25" H-Pipe setup with unknown mufflers and exiting behind the rear wheels. The muffler shop says the pipes are in good shape but the mufflers are shot. So mufflers are definitely...
  17. Mid length LS headers for stock steering

    Church Boys Racing
    Well got got a PM from chuck giving me the OK to start a thread. He told me awhile back about CBR trying to fit so LS header into the "stock sub frame". I know they had some difficulty with a long tube header. So today chuck said it will be closer to a shorty. Chuck did say these will be...
  18. '62 headers

    Drag Racing Forum
    Where can i get a cheap pair of headers for a '62 nova and will headers advertised to fit a '64-'67 nova fit a '62 nova.
  19. Headers on '62 Nova

    Drag Racing Forum
    What headers would you guys recommend to use on a street/strip '62 nova that are a resonable price?
  20. Who's done this???????

    Drivetrain & Performance
    Has anyone ever put 31 inch Hooker Super Comp headers in their 64 with a 350, th400, and stock steering? I would like to do this but im not sure if the headers will fit. Hooker says they will but I dont trust em. If youve done it send pics please. I really dont want to spend 500 bones on some...
Top