Chevy Nova Forum banner

gears

  1. Steering, Suspension, and Chassis
    So this isnt a typical "10 bolt, 12 bolt, or ford 9 inch rear" question Car specs: 4 door 454 about 650hp (maybe more depending on budget) 6 speed 20x8 front 20x10 rears I have a 2000 Camaro V-6 that I am pulling all of the power disc brakes and useable suspension parts off from, and into the...
  2. Drivetrain & Performance
    i have a mono leaf 1971 nova 2 door with a 8.2" rear end. i found a 1978 nova 4 door with multi leaf springs and 8.5" rear end. will i have to modify some things? or should this be a bolt in deal.
  3. 4th Generation Nova's
    I have 1978 nova 496bb 400 tranny with a 10 bolt 8.5 ring with limited slip. I'm looking to beef up the rear end. To change it to posi would be around 500 bucks. I read a post from another member that a 77-81 z28 rear end would bolt up. Can anyone confirm this or any suggestions on what I could...
  4. Drivetrain & Performance
    I'm looking to get a little more "seat of the pants" excitement out of my stock 71 without spending a ton of money and digging into the inner workings of the engine itself. So far I've switched from 2bbl and stock intake to 4bbl and aluminum intake and that's helped a bit. I'm also going to be...
  5. Drivetrain & Performance
    I have a 72 Nova that has 3.08 gears in the rear end. It also has had a spool installed. I have a 307 engine with a TH350 tranny. Is this rear end good for the car? I hope to eventually drop a 383 stroker with a TH400 tranny, so what gears should I run then? Thanks for the help.
Top