General Information
Year
1967
Make
Chevrolet
Model
chevy II
Color
silver
1967 Chevrolet chevy II (silver)
Modifications
Drivetrain
331 CI • GM Performance Vortec Heads• Edelbrock Air Gap • 650 Mighty Demon
Interior
• 8 pt Alston Chassisworks cage
Exterior
• Token Fibreglass (Mission BC) front and rear bumpers mounted with Moroso ¼ turn fasteners on stock brackets. Stock steel bumpers incl.
• Token 4” cowl hood mounted on stock hinges with hood pins
• Stock grill and front end sheet metal. Fenders are average because they were not available when the car was built. The inner fenders are stock.
• Token 4” cowl hood mounted on stock hinges with hood pins
• Stock grill and front end sheet metal. Fenders are average because they were not available when the car was built. The inner fenders are stock.
Suspension
• Alston Double adjustable ladder bars
• Tubular front cross member integrated with the sub frame.
• QA1 single adjustable shocks. 150# springs installed, 130# incl.
• Diagonal brace bolt in.
• 68 Camaro 12 bolt narrowed 7” full welded tubes, big ford bearing ends.
• Toms Axles with Ford bearings.
• Toms billet differential bearing cap 1/2” bolts
• Toms 4150 yoke
• Eaton brute strength posi, 3 series
• Richmond 4.56 gears
• Stock type front
• Afco strut rods with 3/4” ends mounted in custom fabricated mounting brackets. Stock strut rods incl.
• Custom lower spring mounts using Afco solid bushing shells and custom bearing sleeves.
• Moroso trick front springs installed. Stock cut down springs inc. Alignment recommended.
• Competition Engineering travel limiters.
• Competition Engineering 3 way shocks.
• Stock steering with roller bearing kit in the idler arm.
• Tubular front cross member integrated with the sub frame.
• QA1 single adjustable shocks. 150# springs installed, 130# incl.
• Diagonal brace bolt in.
• 68 Camaro 12 bolt narrowed 7” full welded tubes, big ford bearing ends.
• Toms Axles with Ford bearings.
• Toms billet differential bearing cap 1/2” bolts
• Toms 4150 yoke
• Eaton brute strength posi, 3 series
• Richmond 4.56 gears
• Stock type front
• Afco strut rods with 3/4” ends mounted in custom fabricated mounting brackets. Stock strut rods incl.
• Custom lower spring mounts using Afco solid bushing shells and custom bearing sleeves.
• Moroso trick front springs installed. Stock cut down springs inc. Alignment recommended.
• Competition Engineering travel limiters.
• Competition Engineering 3 way shocks.
• Stock steering with roller bearing kit in the idler arm.
Wheel and Tire
weld pro stars with 275/60r15 MT ET streets