Chevy Nova Forum banner

S10 rear brake hose

774 views 3 replies 2 participants last post by  65chevy2see 
#1 ·
For those with an s10 rearend. What are you using for a rear flex hose? I'm assuming the s10 factory hose and hardlines are metric and I need to mate this to a 7/16-24 brake line on the chassis.
 
#3 ·
Ok so it does have metric lines. I want to add a stainless braided hose and move it to the other side of the diff so it lines up with the chassis line. Which means new hard lines on the rearend. So I think the best way to do it is to redo all the lines sae and use adapters at the wheel cylinders. Thoughts?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top