Steve's Nova Site is an automotive enthusiast website dedicated to the 1962 - 1979 Chevrolet Nova, Chevy II and Acadian automobiles. We work together to preserve, restore, drive, show, race and provide fellowship for these classic cars. This is one of the best places to find information about parts, rebuilding, restoration and racing. This website is not affiliated with GM, General Motors or Chevrolet in any capacity.
I need lower gears in the stock rearend (2.41 now) and am trying to decide whether to just put my posi and lower gears in the 10 bolt and some leaf spring wrap bars, or go ahead and switch to a narrowed 9" and whole different suspension. What do you guys recommend?
408 sbc 500-550 HP 700r4 tranny. This is a street rod that may see the track occasionally.
Can anyone give me recommendations for manufacturer's, suspension options, size of tire I can fit now vs narrowed without tubbing, etc.?
Any advice is appreciated this is my first build and I always like to learn from other's wisdom.
A: Street/Strip - 10 bolt, build it up with good parts, will hold up for awhile. I've heard lots of guys running these for quite some time - especially on the street. Focus is on the street with this setup.
B: Strip/Street - 9", build it up with good parts.
Stronger, can handle future mods better and you can get one with axels and housing cut to fit your car...then go out and buy a 3rd member and set up your gears (or have someone else do it). Focus is on the strip with this setup. I'm going with this setup myself, but my direction is strip car that drives to/from the track - little street - not a daily driver but man I'm building a Thumper of an engine!
Do not underestimate the big 10 8.5 rear (should have been stock in your 74)
They are very close to the 12 bolt, pinion bearing are the same, carrier is .300 smaller and the carrier bearing are a little smaller, they are strong rear ends.
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
“The bitterness of poor quality & Service remains long after the sweetness of low price is forgotten”
I agree w Big Al. If you are using the 10 8.5 along with 700r4, You should be able to get a way with it for a while.
I have the same set up, w/3.73. It's a nice strong combo. But I'm only throwing out lil over 350hp.
Are planning to throw a shift kit in the 700?
Sent from my GT-P3113 using AutoGuide.Com Free App
An 8.5 built up can handle some pretty good power, heck a 8.2 can hold 500+ hp on our cars.
Intersting that you mention the 8.2. That's what I have in my car stock. We added homemade limited slip by welding the spider gears at 12 and 6 o'clock. Just a temp solution and I dont launch the car without locking it first. I'm wanting to upgrade the rear end now. I'm considering a 8.5 and somewhere near a 3.55 gear. Thoughts?
'67 Deuce soon to be LS powered.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.