Subframe Connectors

Looking for some help in choosing least visable Bolt On/Weld Subframe Connector. CE appears to hang low. Does anyone have a different opinion on the Alston or Global West versions ?? Photos would be GREAT !!!Thanks:)

these are the ones that I make. They are 1 1/2 .120 wall tube & fit tight. P.M. me if you are interested.
http://i196.photobucket.com/albums/aa23/1BADNOV/IMG_5662.jpg
http://i196.photobucket.com/albums/aa23/1BADNOV/IMG_5663.jpg
http://i196.photobucket.com/albums/aa23/1BADNOV/IMG_5571.jpg

making your own works best. you can fit it exactly how you want. i used 2" x 1" tube stock shaped liked a rectangle. welded them on and you dont even know they are there.

I have the comp eng bolt on subframe connecters.They hang as low as your sub frame.They are easy to install and are alot cheaper.Here they are on my car.My car is a 70.


http://i18.photobucket.com/albums/b115/Renegade78/SubFrameBack1.jpg

http://i18.photobucket.com/albums/b115/Renegade78/SubFrameConnectors.jpg

I put the CE connectors on my '71. They are well made and fit nice, but they do stick down a little. That is not a problem for me except that they prevent me dumping the exhaust just in front of the rear wheels which I think sort of looks cool.:cool:

Dave

I like the ones from Global West...

http://www.globalwest.net/62%2067_nova.htm

(Bottom of Page)

Chuck

I have C/E on my 67 they fit good and dont hang down. 1badnov's connectors and car look great!!

I just picked up a set of 1BadNov's subframe connectors. Had some good Nova talk with the dude when he stopped by to drop them off. One knowledgable cool cat.

Don't even think twice - grab a set from him while he has 'em. A+ on the fabrication! Awesome welds. SOLID! We mocked them up on my subframe... perfect fit.

By the way Boltman... GO CHARGERS!!! :beer:

-IRIE

Just a note to thank everyone for the photos and input, I do appreciate it.. And as a side note to "Irie 63" I sure do hope the Chargers put on a better display this Sunday than I watched this past. "GO CHARGERS"!!! :beer::beer:

I just picked up a set of 1BadNov's subframe connectors. Had some good Nova talk with the dude when he stopped by to drop them off. One knowledgable cool cat...



Where do you get BadNov's subframe connectors?
Web site?
Do they make it for 73 Nova?.


Dan

I see most people use a round tube or bar stock for the connectors , Is it because of clearance issues ?
I am trying to figure out which style is best as I am at my shop looking at all the material here to make a set. I have 2x2 ,1x3, 2x4 .125 and .250 wall rectangle tube . And every thing from 1"-4" bar and 1"-3" round tube stock .125 and .180 wall