Traction Bars

About a million years ago, I read an article somewhere detailing the proper clearance between the traction bar snubber, and the leaf spring, on my new ride, they are touching, and it rides like crapola

what do you guys think?


Steve

I always had 1/2" to 1" of gap between the snubber & the leaf spring. When
it was closer it did ride ruff. The traction bars themselves will make it a little ruffer then without.

I removed the snubbers and put a bolt with double nuts to allow the gap to be adjusted--you can also trim the snubber to give the clearance you need.

cause right now it feels like theres no suspension in the rear at all
they are tight to the leaf, effectively canx the spring action

Ill have to do something, i like the double nut idear !

Steve




I removed the snubbers and put a bolt with double nuts to allow the gap to be adjusted--you can also trim the snubber to give the clearance you need.