Moroso Trick Springs

This is going to sound like a dumb question, but I picked up a set of used Moroso trick springs for my 70. They look a little different then my factory ones in that one end of the coil has been grounded flat where as the other is round like the factory originals. I'll be putting these in this weekend and need to know does the flat end go on the lower control arm or in the upper spring pocket?

Thanks

I would put the flat part on the bottom. The body and control arm has pockets where the springs should rest. Make sure you get them in the cups or it will sit funny and high.

I would put the flat part on the bottom. The body and control arm has pockets where the springs should rest. Make sure you get them in the cups or it will sit funny and high.

Thanks, I've put stock type springs in before so I remember the spring pockets that I have to follow, it was just the flat side on the coil on the one end that was throwing me off. I will go with what you said and put the flat side on the bottom. Thanks 383!