New fuse box and dash wiring question, 64

[f16fxr4real]

I just purchased and installed a dash wiring kit from Classic Industries for my 64 with the SS gauges. The new box has a set of black and black/white stripe wires that have spade connectors on the end. One of them has the spade connector with a "jumper" wire coming out of it and another spade connector on the end of that. Anyone have an idea where they go?

[AGPG]

Those are the wires that go to the shunt resistor that is located on the radiator support ( it should be by the voltage regulator). This is the resistor that feeds the battery guage in the cluster.

I do not remember the exact way they hook up. I will look at my "63 tonight and let you know if no one else answers first.

Al

[BPeer1]

f16fxr4real,
I'm thinking about rewiring my 66SS. I am looking at the Classic Industries harness. I like it because it looks like it has a stock type fuse panel and uses the stock type bulkhead connectors. What do you think of your wiring harness?
BP

[Ken Erdmann]

I bought harness's for my 66 from Classic. They are made by Autowire, and fit exactly like the original.