Ohms for Fuel Cell Sender Question

[adidasink]

I am in the process of buying a 16 gallon fuel cell for my 63 and was wondering what Ohms rating I need to buy.

I was looking at the following:

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D290108&N=4294925239+4294839036+4294920243+115&autoview=sku

All I need to know is what Ohms rating I should go for.

Thanks!
-John

[wskaiser]

Don't buy one on just my memory as my CRS is getting worse but I think it is 0-30 ohms for a 63.

[adidasink]

Don't buy one on just my memory as my CRS is getting worse but I think it is 0-30 ohms for a 63.

I havent found a fuel cell w/sump that has 0 - 30ohms....I found 0-90ohms 70-10ohms...am I going to have to buy a normal cell and then add my own sump in there later on? I was hoping to buy one of Jaz's Pro Street Fuel cells and be done with it....

What fuel cell are you other pro street boys running?

-John

[wskaiser]

Again I am relying on memory but I think the stock gauge for 65 was 0-90 ohms. Not sure about 64, seems like it was still 0-30. Any possibility of finding a 65 gauge panel and substituting the gauge for the earlier 63 gauge. I assume you want to keep the stock gauge panel, otherwise just buy a sending unit and aftermarket gauge that match ohms ratings. Someone jump in here and verify if my memory is correct or not.

[bigc]

If you have an aftermarket gauge or thinking about getting one you should check that as well, I know they are not all 0-90.

[68chevyll]

If you have the money get an aluminum cell. I got to change mine. Later.


Mark!