Photos of floorpans

[Tommy]

Well they aren't the best and won't win A concours event but it's A step towards me being able to cruise again.

http://img.photobucket.com/albums/v284/68sschevyII/68%20seats%20and%20doorpanels/Im000434.jpg

Tommy:)

[Tommy]

http://img.photobucket.com/albums/v284/68sschevyII/68%20seats%20and%20doorpanels/Im000435.jpg

Tommy:)

[kceb10]

nice job:) :)




they wont rush out now:D

[Tommy]

Thanks, I got 2 good coats of the Por-15 on top and coated the bottom side also. I had some issues with things getting in the way underneath but got the better part of it covered(including some on the exhaust pipes). If I can get it on A lift later on I may be able to reach those areas A little better or may just have to take the exhaust out later. Those pipes are big when you are trying to get behind them:D .


http://img.photobucket.com/albums/v284/68sschevyII/68%20seats%20and%20doorpanels/seats/garage%20n%20stuff/Im000444.jpg

Tommy :)

[Joe]

Tommy,
You did a Nice Job.I am sure you know this but,If you didn't Welded the Underside Drop whatever it Takes out of the way and Seal with a Good Seam Sealer.
Joe

[Tommy]

It's welded top and bottom Joe. I had about A 1/4 inch overlap on all the metal and A little more in the front footwell. I used planty of U-pol weld through primer. The biggest areas I was having problems with was the top of the driveshaft tunnel (no welding was done thier) and right above the areas where the subframe bolts up. All the seams are por-ed. Thats A nasty job when it's being aplied over head and your beating your elbows against the car cause you don't have it up in the air high enough (jack stands). You learn as you go .......:D

Tommy:)

[Joe]

Like I said you did a Great Job.Welding the Bottom is Very Good.
Joe

[Bluesman]

Those floorpans look great, Tommy! You can come out and do mine anytime you want!:beer:

Dave