70'....Connecting horn wire "101"

[john_L.]

The horn blows when I run it to the battery. But I'm beating my head against the steering wheel trying to figure out how this wire gets connected in the tower cam, on a 71, I know it locks in with a twist. Is this one something different as far as connecting it to the cam? I asked this before but could have been bad timing. Thanks

[Custom Jim]

Here's a shot of the horn wire for my 1974 Nova but it doesn't look like yours though. Mine goes into a tube and by lining up the tab off of the side to a slot in the tube it is pushed inward to compress the spring and then when bottomed out given a little twist one way to lock the tab into the tube. I have had some that the spring did not have enough tension on it and by slightly stretching the spring it held it in tighter.

[copper]

that looks like what i need from the bit sticking up,thanks a lot.ALAN:nascar: :chev: :beer: GO #48

[john_L.]

Thanks....yep, that's looks like the same operation as the 71', but I still have not figured out the one I posted.