Novahead
15th-October-2009, 06:56 PM
1967 heads castings number 3904390 . According to the casting’s they are 1967 98.4 cc closed chamber. Used on the 390hp/427 HP or 350hp/396 oval port, they use the large plug with a flat washer. I had Millwood auto go through the heads they milled them 3 thousands and installed brass guilds in the exhaust only. Three angle valve job, 2.20 intake 1.88 exhaust with Comp springs and retainer. I had them clean the intake and exhaust bowls mildly, the springs are 115 pounds at seat, set up for a mild to moderate lift cam. They are in very good condition and have about 1,500 miles on them. I decided not to use them for the aplication I need. 600.00 I might pay shipping. Mattawan MI, You may call me 269-806-6891 ask for Phil thanks
67 Nova Boy
15th-October-2009, 10:02 PM
1967 heads castings number 3904390 . According to the casting’s they are 1967 98.4 cc closed chamber. Used on the 390hp/427 HP or 350hp/396 oval port, they use the large plug with a flat washer. I had Millwood auto go through the heads they milled them 3 thousands and installed brass guilds in the exhaust only. Three angle valve job, 2.20 intake 1.88 exhaust with Comp springs and retainer. I had them clean the intake and exhaust bowls mildly, the springs are 115 pounds at seat, set up for a mild to moderate lift cam. They are in very good condition and have about 1,500 miles on them. I decided not to use them for the aplication I need. Mattawan MI, You may call me 269-806-6891 ask for Phil thanks
************$????????
Dave
67 Nova Boy
Novahead
17th-October-2009, 06:57 PM
600.00 or best. I have photos if you would like, as for shipping your bill thanks.