62 steering wheel removal

I removed the horn button and noticed there was a goofey cup thingy with three funky headed screws I'm guessing I need to remove them but what type of bit does it take???? Sorry the pic is not real good I had to use my phone wife hid the good digi cam

torx bit should do the job

after you get that off, you'll need to use a gear puller to get the wheel off the splined shaft.

They are clutch head screws. You should be able to pick up a set of drivers at your local NAPA store. Usually a set of 3 in a package.

Jim

Thanks guys I get the bits and puller in the morning.

The wheel has threaded holes in the face, you will need some bolts that fit into those holes that hook to the puller. I guess what you want is more of a harmonic balancer puller than a gear puller. Something like this:

http://us.st12.yimg.com/us.st.yimg.com/I/toolsplus_2018_221172011

You can buy a specific steering wheel puller and then its a peice of cake to take the steering wheel off. NAPA has them